by garygid (Posted Sun, 28 Apr 2013 07:58:07 GMT)
In modifying the ELM327 "stubby" device, I am going to
try to add a slide switch to easily select the CAN bus.
I will report back later on the result.
As long as one is not trying to Log all the CAN Messages,
which requires a high data rate, this "stubby" plus the
eVent phone appears to be a quite reasonable solution.
Cheers, Gary
In modifying the ELM327 "stubby" device, I am going to
try to add a slide switch to easily select the CAN bus.
I will report back later on the result.
As long as one is not trying to Log all the CAN Messages,
which requires a high data rate, this "stubby" plus the
eVent phone appears to be a quite reasonable solution.
Cheers, Gary