by TickTock (Posted Tue, 04 Jun 2013 07:13:10 GMT)
Good thought. You can touch the 3.3V and 5V supplies easily without removing from the enclosure (far right two pins on the mbed looking into the bottom). Measuring Zener drop is probably not possible without at least some disassembly, but that should be 6V if you are able to test.
Good thought. You can touch the 3.3V and 5V supplies easily without removing from the enclosure (far right two pins on the mbed looking into the bottom). Measuring Zener drop is probably not possible without at least some disassembly, but that should be 6V if you are able to test.